← Swipe to watch the full table →
Performance Additives for Dry Mix Products
|
Product |
Chemistry |
Application Area |
Special Feature |
|
|||||||
Plaster |
Tile adhesive |
Levelling system |
Joint filler |
Screeds |
Sealants |
Gypsum |
Cement |
|||||
defoamer |
CLiQSMART CM 100 |
inorganic carrier, polymer, mineral-oil and VOC-free |
- |
x |
o |
x |
x |
o |
x |
o |
based on renewable resources, strong and fast defoaming effect; especially for smooth surfaces |
|
CLiQSMART CM 110 |
inorganic carrier, polymer, mineral-oil and VOC-free |
- |
x |
x |
x |
o |
x |
x |
x |
fast and efficient defoamer, provides wetting; recommended for entrapped air on particles surfaces or in systems with low water content |
|
|
CLiQSMART CM 120 |
inorganic carrier, polymer, mineral-oil and VOC-free |
- |
o |
x |
o |
x |
x |
x |
x |
excellent cost/performance balance; optimized distribution. of active material for efficienc; very low impact on secondary properties |
|
|
air entraining |
CLiQSMART CM 220 |
inorganic carrier; polymer; VOC-free |
x |
- |
o |
- |
- |
- |
x |
x |
excellent solubility for maximum foam formation; stabilising effect through chemical interactions; strong affinity to mineral surfaces |
|
anti-shrink agent |
CLiQSMART CM 400 |
inorganic carrier; alkyl ether |
o |
- |
x |
x |
x |
- |
x |
x |
persistent reduction of chemical shrinkage; hydrophobic structure; reduces surface tension |
|
dust reducer |
CLiQSMART CM 420 |
mineral-oil and VOC-free |
x |
x |
x |
x |
x |
x |
x |
x |
reduces dust formation during processing to meet strongest workplace requirements; no negative impact on system performance |
|
open time extender |
CLiQSMART CM 430 |
norganic carrier, mineral-oil and VOC-free |
o |
x |
o |
o |
o |
o |
o |
o |
prolongs open time & improves workability. reduces cracking and pin-hole formation |
|
wetting agent |
CLiQSPERSE CM 326 |
inorganic carrier; non-ionic polymer; VOC-free |
o |
o |
x |
x |
o |
x |
x |
x |
fast and strong wetting of solid particles; provides homogeneous mixtures; very low foam formation; stabilizes colour development |
|
CLiQSPERSE CM 327 |
inorganic carrier; non-ionic polymer; VOC-compliant |
x |
- |
x |
x |
x |
- |
x |
x |
fast and strong reduction in dynamic surface tension; ultra-low foam formation |
|
|
rheological additives |
CLiQFLOW 601 |
benificiated and activated smectite clay |
x |
x |
o |
x |
x |
x |
o |
x |
economic clay to improve workability and pumpability; provides slump resistance |
|
CLiQFLOW 602 |
polymeric modified smectite clay |
o |
x |
- |
x |
o |
x |
x |
x |
modified clay improves workability and slump resistance; provides water retention |
|
|
CLiQFLOW 603 |
polymeric modified smectite clay |
o |
x |
- |
x |
o |
x |
x |
x |
modified clay to improve slump resistanceprovides body and water retention |
|